This is to select all the record based on month.
Now my requirement is to change to cardno=0000055799&txtLog_Date='2/2/2018'&txtCompleted_Date='2/3/2018'
can somebody help to revise below ashx coding so that it can pass correct parameter to my store procedure in MSsql..
Public Class rpt_Detail_Dept : Implements IHttpHandler, IRequiresSessionState
Private dConn As New SqlConnection(ConfigurationManager.ConnectionStrings("DataDB").ConnectionString)
Public Sub ProcessRequest(Page As HttpContext) Implements IHttpHandler.ProcessRequest
Try
Dim dComm As New SqlCommand("", dConn), tData As New DataTable()
Dim dData As New SqlDataAdapter(dComm) : dData.Fill(tData) : dData.Dispose() : dComm.Dispose()
Dim iStrm As String() = Nothing, iWarn As Warning() = Nothing, iEncd As String = "", iExtn As String = "", iMime As String = ""
Dim iRepo As New LocalReport(), iData As New ReportDataSource()
Dim iByte As Byte() = iRepo.Render("PDF", Nothing, iMime, iEncd, iExtn, iStrm, iWarn)
Page.Response.Buffer = True
Page.Response.Clear() : Page.Response.ContentType = iMime
Page.Response.AppendHeader("content-disposition", "attachment; filename=" & Now.ToString("yyyyMMdd_HHmmss") & "." & iExtn)
Page.Response.OutputStream.Write(iByte, 0, iByte.Length)
Page.Response.Flush()
Catch ex As Exception
Page.Response.ContentType = "text/html" : Throw ex
Finally
If Not dConn.State = ConnectionState.Closed Then dConn.Close()
End Try
End Sub
Public ReadOnly Property IsReusable() As Boolean Implements IHttpHandler.IsReusable
Get
Return False
End Get
End Property
Public ReadOnly Property CardNo(Page As HttpContext) As String
Get
Dim iData As String
If Not String.IsNullOrWhiteSpace(Page.Request.QueryString("cardno")) Then
iData = Page.Request.QueryString("cardno")
Else
iData = ""
End If
Return iData
End Get
End Property
Public ReadOnly Property Month(Page As HttpContext) As Int32
Get
Dim iData As Int32
If Not Double.TryParse(Page.Request.QueryString("month"), iData) Then iData = Now.Month
Return iData
End Get
End Property
Public ReadOnly Property Year(Page As HttpContext) As Int32
Get
Dim iData As Int32
If Not Double.TryParse(Page.Request.QueryString("year"), iData) Then iData = Now.Year
Return iData
End Get
End Property
End Class
--------------------------- end of ashx ------------------------------------------------------------
Above ashx will pass the parameter to sp as below :
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER PROC [dbo].[$_Rpt_vehicle]
@Card VARCHAR(16),
@txtLog_Date Datetime,
@txtCompleted_Date Datetime
AS SET NOCOUNT ON
BEGIN
set @card = @card
SELECT cardno, trdate
FROM VW_RPT_van2
where
cardno = @Card
and
trdate between @txtLog_Date and @txtCompleted_Date
END
----------------------------- end of sp --------------------------
FYI, my sp is able to display all those record which are based on cardno and txtlog_date and txtCompleted_date
how can I modify the ashx so that I can display record on my asp page?
.NET forums are moving to a new home on Microsoft Q&A, we encourage you to go to Microsoft Q&A for .NET for posting new questions and get involved today.
Thanks for the input here. I did input as what you did before. It ended up as below error :
Server Error in '/' Application.
Compilation Error
Description:
An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: BC30451: 'txtLog_Date' is not declared. It may be inaccessible due to its protection level.
Source Error:
Line 13: dComm.CommandType = CommandType.StoredProcedure
Line 14: dComm.Parameters.Add(New SqlParameter("@Card", CardNo(Page)))
Line 15: dComm.Parameters.Add(New SqlParameter("@txtlog_Date", txtLog_Date(Page)))
Line 16: dComm.Parameters.Add(New SqlParameter("@txtCompleted_Date", txtCompleted_Date(Page)))
Line 17: dComm.CommandTimeout = 0
c:\windows\system32\inetsrv> "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\vbc.exe" /t:library /utf8output /R:"C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll" /R:"C:\Windows\assembly\GAC_MSIL\Microsoft.ReportViewer.WebForms\12.0.0.0__89845dcd8080cc91\Microsoft.ReportViewer.WebForms.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Activities\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Activities.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_64\System.Web\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ComponentModel.DataAnnotations\v4.0_4.0.0.0__31bf3856ad364e35\System.ComponentModel.DataAnnotations.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Drawing\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Drawing.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Activation\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Activation.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Web\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Web.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Extensions\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.Extensions.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.CSharp\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.CSharp.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Activities\v4.0_4.0.0.0__31bf3856ad364e35\System.Activities.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Data.DataSetExtensions\v4.0_4.0.0.0__b77a5c561934e089\System.Data.DataSetExtensions.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.WorkflowServices\v4.0_4.0.0.0__31bf3856ad364e35\System.WorkflowServices.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.IdentityModel\v4.0_4.0.0.0__b77a5c561934e089\System.IdentityModel.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.DynamicData\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.DynamicData.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.ApplicationServices\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.ApplicationServices.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll" /R:"C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml.Linq\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.Linq.dll" /out:"C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Temporary ASP.NET Files\root\ab46d8ff\2bc3d1c9\App_Web_rpt_vehicle.ashx.cdcab7d2.7qc-v7e7.dll" /D:DEBUG=1 /debug+ /nowarn:41008,40000,40008 /define:_MYTYPE=\"Web\" /imports:Microsoft.VisualBasic,System,System.Collections,System.Collections.Generic,System.Collections.Specialized,System.Configuration,System.Data,System.Data.SqlClient,System.Globalization,System.Net.Mail,System.Text,System.Text.RegularExpressions,System.Xml,System.Web,System.Web.Caching,System.Web.SessionState,System.Web.Security,System.Web.Profile,System.Web.UI,System.Web.UI.WebControls,System.Web.UI.WebControls.WebParts,System.Web.UI.HtmlControls /warnaserror- /optionInfer+ "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Temporary ASP.NET Files\root\ab46d8ff\2bc3d1c9\App_Web_rpt_vehicle.ashx.cdcab7d2.7qc-v7e7.0.vb" "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Temporary ASP.NET Files\root\ab46d8ff\2bc3d1c9\App_Web_rpt_vehicle.ashx.cdcab7d2.7qc-v7e7.1.vb"
Microsoft (R) Visual Basic Compiler version 12.0.52400.36400
Copyright (c) Microsoft Corporation. All rights reserved.
C:\CorpServer\AttdReport\rpt_vehicle.ashx(15) : error BC30451: 'txtLog_Date' is not declared. It may be inaccessible due to its protection level.
dComm.Parameters.Add(New SqlParameter("@txtlog_Date", txtLog_Date(Page)))
~~~~~~~~~~~
C:\CorpServer\AttdReport\rpt_vehicle.ashx(16) : error BC30451: 'txtCompleted_Date' is not declared. It may be inaccessible due to its protection level.
dComm.Parameters.Add(New SqlParameter("@txtCompleted_Date", txtCompleted_Date(Page)))
~~~~~~~~~~~~~~~~~
As written in the ashx as dComm.CommandText = "[$_Rpt_Vehicle]" , I already created a sp in SQL named $_rept_vehicle. The variables are well defined in there.
May I know do I need to check this file iRepo.ReportPath = Page.Server.MapPath("~/rpt_vehicle.rdlc") for its structure data ?
You have define the CardNo,Month,Year function to get the datetime from the querystring. You also need create some new property to get the datetime from the querystring.
Add below codes into class:
Public ReadOnly Property txtLog_Date(Page As HttpContext) As DateTime
Get
Dim iData As DateTime
If Not DateTime.TryParse(Page.Request.QueryString("txtCompleted_Date"), iData) Then iData = DateTime.Now
Return iData
End Get
End Property
Public ReadOnly Property txtCompleted_Date(Page As HttpContext) As DateTime
Get
Dim iData As DateTime
If Not DateTime.TryParse(Page.Request.QueryString("txtCompleted_Date"), iData) Then iData = DateTime.Now
Return iData
End Get
End Property
Best Regards,
Brando
.NET forums are moving to a new home on Microsoft Q&A, we encourage you to go to Microsoft Q&A for .NET for posting new questions and get involved today.
Thanks for the guide. I finally got rid of the error from the asp page. It can generate pdf from the ashx file. But it showed blank record . I know that I need to revise the store procedure and then can able to dump the data into rdlc file , this rdlc
is used to generate the pdf.
As showed in ashx
Dim iRepo As New LocalReport(), iData As New ReportDataSource()
Thanks for the guide. I finally got rid of the error from the asp page. It can generate pdf from the ashx file. But it showed blank record . I know that I need to revise the store procedure and then can able to dump the data into rdlc file , this rdlc is used
to generate the pdf.
According to your SP, I think it will select the value if you set the right parameter.
Since I don't have your application environment, I suggest you could try to debug the application by yourself.
I suggest you could set a breakpoint at the dComm.CommandTimeout = 0
line to check the txtCompleted_Date(Page), txtLog_Date(Page) has the right data.
Then I suggest you could check the tData has value.
More details about how to use breakpoint in the VS, I suggest you could refer to below article.
.NET forums are moving to a new home on Microsoft Q&A, we encourage you to go to Microsoft Q&A for .NET for posting new questions and get involved today.
I don't know how to MS Visual studio for this task. I will try to use ms edge developer tool by pressing F12 on the asp page...Hope I can able set the breakpoint at the ashx file with the mentioned line ..FYI, the asp page is to call ashx file , If I set
breakpoint F9 onto that asp page, will it able to go to ashx file?
I don't know how to MS Visual studio for this task. I will try to use ms edge developer tool by pressing F12 on the asp page...Hope I can able set the breakpoint at the ashx file with the mentioned line ..FYI, the asp page is to call ashx file , If I set
breakpoint F9 onto that asp page, will it able to go to ashx file?
Firstly, the browser develop tool(F12) is not as same as the visual studio develop tool, you couldn't set the breakpoint in the visual from the browser.
I suggest you could set the breakpoint directly in the ashx file in VS.
Then if the request send into the ashx, it will fired the breakpoint.
Best Regards,
Brando
.NET forums are moving to a new home on Microsoft Q&A, we encourage you to go to Microsoft Q&A for .NET for posting new questions and get involved today.
But the data was pull out based on below SP which is to receive 3 parameters namely cardno, month, and year. Could pls help me to turn these 3 parameters into my expected cardno, txtlog_date and txtCompleted_date ?
Do you mean you wants to replace the DtFr and DtTo with txtlog_date and xtCompleted_date?
If this is your requirement, I suggest you could try below SP:
GO
ALTER PROC [dbo].[$_Rpt_vehicle]
@Card VARCHAR(16), -- Employee Card No.
@txtlog_date DATETIME, -- Trx. Year
@xtCompleted_date DATETIME -- Trx. Month
AS SET NOCOUNT ON
BEGIN
DECLARE @Temp TABLE ( [Id] INT IDENTITY(1,1), [Date] DATETIME, [WDay] NVARCHAR(100) )
;WITH tData AS
( SELECT @txtlog_date [Date] UNION ALL SELECT DATEADD(DAY,1,[Date]) FROM tData WHERE DATEADD(DAY,1,[Date]) < @xtCompleted_date )
INSERT INTO @Temp ( [Date], [WDay] ) SELECT mt.[Date], DATENAME(WEEKDAY,mt.[Date]) FROM tData mt
SELECT
'',
CardNo [EmplCard], Name [EmplName], [DepartmentDesc] [EmplSrcs], [InOut] [InOutDes],
TrDate [TrnxDate], TrTime [TrnxTmMn], TrController [TrnxTmMx],
''
FROM VW_RPT_van2
WHERE
CardNo = @Card AND YEAR(TrDate) = @Year AND MONTH(TrDate) = @Mnth
GROUP BY
TrDate, [TrDay], TrTime, CardNo, Name, [DepartmentDesc], [InOut] , TrController
END
Best Regards,
Brando
.NET forums are moving to a new home on Microsoft Q&A, we encourage you to go to Microsoft Q&A for .NET for posting new questions and get involved today.
None
0 Points
6 Posts
How To Re-code Ashx For Correct Parameter, asp.net
Feb 02, 2018 08:28 AM|Ipohtech|LINK
http://172.20.100.12:888/rpt_vehicle.ashx?cardno=0000055799&txtLog_Date='2/2/2018'&txtCompleted_Date='2/3/2018'
Hi, all.
Attached is showing how the 3 parameters are passed to ahsx asp.net. But in the ashx, it would use something like as below :
http://172.20.100.12:888/rpt_Detail_dept.ashx?cardno=0000008904&year=2018&month=2
This is to select all the record based on month.
Now my requirement is to change to cardno=0000055799&txtLog_Date='2/2/2018'&txtCompleted_Date='2/3/2018'
can somebody help to revise below ashx coding so that it can pass correct parameter to my store procedure in MSsql..
<%@ WebHandler Language="VB" Class="rpt_Detail_Dept" %>
Imports Microsoft.Reporting.WebForms
Public Class rpt_Detail_Dept : Implements IHttpHandler, IRequiresSessionState
Private dConn As New SqlConnection(ConfigurationManager.ConnectionStrings("DataDB").ConnectionString)
Public Sub ProcessRequest(Page As HttpContext) Implements IHttpHandler.ProcessRequest
Try
Dim dComm As New SqlCommand("", dConn), tData As New DataTable()
dComm.CommandText = "[$_RptDetail]"
dComm.CommandType = CommandType.StoredProcedure
dComm.Parameters.Add(New SqlParameter("@Card", CardNo(Page)))
dComm.Parameters.Add(New SqlParameter("@Mnth", Month(Page)))
dComm.Parameters.Add(New SqlParameter("@Year", Year(Page)))
dComm.CommandTimeout = 0
Dim dData As New SqlDataAdapter(dComm) : dData.Fill(tData) : dData.Dispose() : dComm.Dispose()
Dim iStrm As String() = Nothing, iWarn As Warning() = Nothing, iEncd As String = "", iExtn As String = "", iMime As String = ""
Dim iRepo As New LocalReport(), iData As New ReportDataSource()
iData.Name = "tMain" : iData.Value = tData
iRepo.ReportPath = Page.Server.MapPath("~/rpt_Detail_Dept.rdlc")
iRepo.DataSources.Add(iData)
Dim iByte As Byte() = iRepo.Render("PDF", Nothing, iMime, iEncd, iExtn, iStrm, iWarn)
Page.Response.Buffer = True
Page.Response.Clear() : Page.Response.ContentType = iMime
Page.Response.AppendHeader("content-disposition", "attachment; filename=" & Now.ToString("yyyyMMdd_HHmmss") & "." & iExtn)
Page.Response.OutputStream.Write(iByte, 0, iByte.Length)
Page.Response.Flush()
Catch ex As Exception
Page.Response.ContentType = "text/html" : Throw ex
Finally
If Not dConn.State = ConnectionState.Closed Then dConn.Close()
End Try
End Sub
Public ReadOnly Property IsReusable() As Boolean Implements IHttpHandler.IsReusable
Get
Return False
End Get
End Property
Public ReadOnly Property CardNo(Page As HttpContext) As String
Get
Dim iData As String
If Not String.IsNullOrWhiteSpace(Page.Request.QueryString("cardno")) Then
iData = Page.Request.QueryString("cardno")
Else
iData = ""
End If
Return iData
End Get
End Property
Public ReadOnly Property Month(Page As HttpContext) As Int32
Get
Dim iData As Int32
If Not Double.TryParse(Page.Request.QueryString("month"), iData) Then iData = Now.Month
Return iData
End Get
End Property
Public ReadOnly Property Year(Page As HttpContext) As Int32
Get
Dim iData As Int32
If Not Double.TryParse(Page.Request.QueryString("year"), iData) Then iData = Now.Year
Return iData
End Get
End Property
End Class
--------------------------- end of ashx ------------------------------------------------------------
Above ashx will pass the parameter to sp as below :
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER PROC [dbo].[$_Rpt_vehicle]
@Card VARCHAR(16),
@txtLog_Date Datetime,
@txtCompleted_Date Datetime
AS SET NOCOUNT ON
BEGIN
set @card = @card
SELECT cardno, trdate
FROM VW_RPT_van2
where
cardno = @Card
and
trdate between @txtLog_Date and @txtCompleted_Date
END
----------------------------- end of sp --------------------------
FYI, my sp is able to display all those record which are based on cardno and txtlog_date and txtCompleted_date
how can I modify the ashx so that I can display record on my asp page?
TQ
Star
9831 Points
3120 Posts
Re: How To Re-code Ashx For Correct Parameter, asp.net
Feb 05, 2018 09:13 AM|Brando ZWZ|LINK
Hi Ipohtech,
According to your description, if you want to use the new SP in the ashx, you could change the parameter send to the SP.
Best Regards,
Brndo
None
0 Points
6 Posts
Re: How To Re-code Ashx For Correct Parameter, asp.net
Feb 06, 2018 01:05 AM|Ipohtech|LINK
Hi, Brando.
Thanks for the input here. I did input as what you did before. It ended up as below error :
Server Error in '/' Application.
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: BC30451: 'txtLog_Date' is not declared. It may be inaccessible due to its protection level.
Source Error:
Line 13: dComm.CommandType = CommandType.StoredProcedure Line 14: dComm.Parameters.Add(New SqlParameter("@Card", CardNo(Page))) Line 15: dComm.Parameters.Add(New SqlParameter("@txtlog_Date", txtLog_Date(Page))) Line 16: dComm.Parameters.Add(New SqlParameter("@txtCompleted_Date", txtCompleted_Date(Page))) Line 17: dComm.CommandTimeout = 0
<div class="expandable">Show Detailed Compiler Output:</div> <div id="compilerOutputDiv" style="display: none;">Source File: C:\CorpServer\AttdReport\rpt_vehicle.ashx Line: 15
----------------------------------------------------------- end------------------------------
As written in the ashx as dComm.CommandText = "[$_Rpt_Vehicle]" , I already created a sp in SQL named $_rept_vehicle. The variables are well defined in there.
May I know do I need to check this file iRepo.ReportPath = Page.Server.MapPath("~/rpt_vehicle.rdlc") for its structure data ?
TQ
Star
9831 Points
3120 Posts
Re: How To Re-code Ashx For Correct Parameter, asp.net
Feb 06, 2018 02:03 AM|Brando ZWZ|LINK
Hi Ipohtech,
You have define the CardNo,Month,Year function to get the datetime from the querystring. You also need create some new property to get the datetime from the querystring.
Add below codes into class:
Best Regards,
Brando
None
0 Points
6 Posts
Re: How To Re-code Ashx For Correct Parameter, asp.net
Feb 06, 2018 09:41 AM|Ipohtech|LINK
Dear Brando
Thanks for the guide. I finally got rid of the error from the asp page. It can generate pdf from the ashx file. But it showed blank record . I know that I need to revise the store procedure and then can able to dump the data into rdlc file , this rdlc is used to generate the pdf.
As showed in ashx
Dim iRepo As New LocalReport(), iData As New ReportDataSource()
iData.Name = "tMain" : iData.Value = tData
iRepo.ReportPath = Page.Server.MapPath("~/rpt_vehicle.rdlc")
iRepo.DataSources.Add(iData)
Dim iByte As Byte() = iRepo.Render("PDF", Nothing, iMime, iEncd, iExtn, iStrm, iWarn)
----------------- ashx -----------------------
there is a variable called idata. So, how can I add this idata into my store procedure as below :
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER PROC [dbo].[$_Rpt_vehicle]
@Card VARCHAR(16),
@txtLog_Date Datetime,
@txtCompleted_Date Datetime
AS SET NOCOUNT ON
BEGIN
set @card = @card
SELECT cardno, trdate
FROM VW_RPT_van2
where
cardno = @Card
and
trdate between @txtLog_Date and @txtCompleted_Date
END
----------------------------------- sp -------------------------
Thanks again
Star
9831 Points
3120 Posts
Re: How To Re-code Ashx For Correct Parameter, asp.net
Feb 07, 2018 07:54 AM|Brando ZWZ|LINK
Hi Ipohtech,
According to your SP, I think it will select the value if you set the right parameter.
Since I don't have your application environment, I suggest you could try to debug the application by yourself.
I suggest you could set a breakpoint at the
dComm.CommandTimeout = 0
line to check the txtCompleted_Date(Page), txtLog_Date(Page) has the right data.Then I suggest you could check the
tData
has value.More details about how to use breakpoint in the VS, I suggest you could refer to below article.
https://msdn.microsoft.com/en-us/library/5557y8b4.aspx?f=255&MSPPError=-2147217396
Best Regards,
Brando
None
0 Points
6 Posts
Re: How To Re-code Ashx For Correct Parameter, asp.net
Feb 07, 2018 10:08 AM|Ipohtech|LINK
Thanks Brando.
I don't know how to MS Visual studio for this task. I will try to use ms edge developer tool by pressing F12 on the asp page...Hope I can able set the breakpoint at the ashx file with the mentioned line ..FYI, the asp page is to call ashx file , If I set breakpoint F9 onto that asp page, will it able to go to ashx file?
Thx
Star
9831 Points
3120 Posts
Re: How To Re-code Ashx For Correct Parameter, asp.net
Feb 08, 2018 05:26 AM|Brando ZWZ|LINK
Hi Ipohtech,
Firstly, the browser develop tool(F12) is not as same as the visual studio develop tool, you couldn't set the breakpoint in the visual from the browser.
I suggest you could set the breakpoint directly in the ashx file in VS.
Then if the request send into the ashx, it will fired the breakpoint.
Best Regards,
Brando
None
0 Points
6 Posts
Re: How To Re-code Ashx For Correct Parameter, asp.net
Feb 21, 2018 08:08 AM|Ipohtech|LINK
Hi, Brando.
Almost done. Now, my report can be pulled out of system. see attached.
http://www.utteraccess.com/forum/index.php?act=attach&type=post&id=85502
But the data was pull out based on below SP which is to receive 3 parameters namely cardno, month, and year. Could pls help me to turn these 3 parameters into my expected cardno, txtlog_date and txtCompleted_date ?
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER PROC [dbo].[$_Rpt_vehicle]
@Card VARCHAR(16), -- Employee Card No.
@Year INT, -- Trx. Year
@Mnth INT -- Trx. Month
AS SET NOCOUNT ON
BEGIN
DECLARE @Temp TABLE ( [Id] INT IDENTITY(1,1), [Date] DATETIME, [WDay] NVARCHAR(100) )
DECLARE @DtFr DATETIME, @DtTo DATETIME
SET @DtFr = CAST(CAST(@Year AS VARCHAR) + '/' + CAST((@Mnth+0) AS VARCHAR) + '/01' AS DATETIME)
SET @DtTo = DATEADD(month, 1,CAST(CAST(@Year AS VARCHAR) + '/' + CAST((@Mnth+0) AS VARCHAR) + '/01' AS DATETIME))
;WITH tData AS
( SELECT @DtFr [Date] UNION ALL SELECT DATEADD(DAY,1,[Date]) FROM tData WHERE DATEADD(DAY,1,[Date]) < @DtTo )
INSERT INTO @Temp ( [Date], [WDay] ) SELECT mt.[Date], DATENAME(WEEKDAY,mt.[Date]) FROM tData mt
SELECT
'',
CardNo [EmplCard], Name [EmplName], [DepartmentDesc] [EmplSrcs], [InOut] [InOutDes],
TrDate [TrnxDate], TrTime [TrnxTmMn], TrController [TrnxTmMx],
''
FROM VW_RPT_van2
WHERE
CardNo = @Card AND YEAR(TrDate) = @Year AND MONTH(TrDate) = @Mnth
GROUP BY
TrDate, [TrDay], TrTime, CardNo, Name, [DepartmentDesc], [InOut] , TrController
END
----------------------------------- end of SP ----------------------------------
Star
9831 Points
3120 Posts
Re: How To Re-code Ashx For Correct Parameter, asp.net
Feb 27, 2018 02:32 AM|Brando ZWZ|LINK
Hi Ipohtech,
Do you mean you wants to replace the DtFr and DtTo with txtlog_date and xtCompleted_date?
If this is your requirement, I suggest you could try below SP:
Best Regards,
Brando