OutputPath property is not set for this project RSS

• • Reply
  MattBell

  Member

  1 Points

  7 Posts

  OutputPath property is not set for this project

  Aug 27, 2007 05:02 PM|MattBell|LINK

  Hello,

  I have a strange error I'm hoping someone can help me with.  I created a Web Deployment project for a site I'm working on, and am able to build the project under the "Release" configuration setting.  However when I create a new solution configuration for a specific client and create a new configuration for that web deploy project I get this rather confusing message: "The OutputPath property is not set for this project.  Please check to make sure that you have specified a valid Configuration/Platform combination.  Configuration='ClientRelease'  Platform='AnyCPU'  "
  

  I have opened up the project file and looked at the xml, and there is most certainly a OutputPath specified ".\ClientRelease"  and everything else in the xml looks fine to me. I can switch back to regular release which has all of the same settings except for the one project's configuration and it builds just fine again.

  Has anyone seen behavior like this before?  I'm about out of ideas to try on this, and I'd love to hear some thoughts

  Matt

  VS 2005 Web Deployment Projects Visual Studio 2005 Web Deployment Projects "Web Deployment Project" OutputPath

• • Reply
  shura26

  None

  0 Points

  3 Posts

  Re: OutputPath property is not set for this project

  Nov 26, 2007 09:39 AM|shura26|LINK

  Hello!

  I've got the same problem and I've found the solution. It looks like configuration manager doesn't touch deployment project after new configuration have been added. In my case I've got this type of error after adding new 'Debug' based build configuration. The solution was:

  1. Open project file for deployment project

  2. Find PropertyGroup section for 'Debug' configuration

  3. Create a copy of this section, change condition attribute to match new configuration and anything you need to change inside PropertyGroup section
  

  That's all. 

  Web Deployment Project msbuild build configuration

  shura
• • Reply
  cosmos109

  None

  0 Points

  3 Posts

  Re: OutputPath property is not set for this project

  Nov 28, 2007 05:57 AM|cosmos109|LINK

   

  Hello,

  I have exactly the same problem, but editing wdproj didn't work for me I have always the same error.

  <!--

  Microsoft Visual Studio 2005 Web Deployment Project

  http://go.microsoft.com/fwlink/?LinkId=55111

  -->

  <Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">

  <PropertyGroup>

  <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>

  <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>

  <ProductVersion>8.0.60403</ProductVersion>

  <SchemaVersion>2.0</SchemaVersion>

  <ProjectGuid>{4DCA46BC-25F6-4B42-B446-FBB6FB8EC3CA}</ProjectGuid>

  <SourceWebPhysicalPath>..\web</SourceWebPhysicalPath>

  <SourceWebProject>{6CAEC976-7083-4CBD-B3EC-FFB9AE9F7415}|http://localhost/Project</SourceWebProject>

  <SourceWebVirtualPath>/Project</SourceWebVirtualPath>

  <SourceWebMetabasePath>/LM/W3SVC/1/ROOT/Project/</SourceWebMetabasePath>

  <SccProjectName>SAK</SccProjectName>

  <SccLocalPath>SAK</SccLocalPath>

  <SccAuxPath>SAK</SccAuxPath>

  <SccProvider>SAK</SccProvider>

  </PropertyGroup>

  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">

  <DebugSymbols>true</DebugSymbols>

  <OutputPath>.\Debug</OutputPath>

  <EnableUpdateable>true</EnableUpdateable>

  <UseMerge>true</UseMerge>

  <SingleAssemblyName>_deploy_UI</SingleAssemblyName>

  </PropertyGroup>

  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">

  <DebugSymbols>false</DebugSymbols>

  <OutputPath>.\Release</OutputPath>

  <EnableUpdateable>true</EnableUpdateable>

  <UseMerge>true</UseMerge>

  <SingleAssemblyName>_deploy_UI</SingleAssemblyName>

  </PropertyGroup>

  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Pelvoux|AnyCPU' ">

  <EnableUpdateable>true</EnableUpdateable>

  <UseMerge>true</UseMerge>

  <SingleAssemblyName>_deploy_UI</SingleAssemblyName>

  <OutputPath>.\Pelvoux</OutputPath>

  <UseWebConfigReplacement>true</UseWebConfigReplacement>

  </PropertyGroup>

  <ItemGroup>

  </ItemGroup>

  <ItemGroup>

  <ProjectReference Include="..\BE\BE.csproj">

  <Project>{A9C63741-1F74-422A-9E33-342DBDA29AF1}</Project>

  <Name>BE</Name>

  </ProjectReference>

  <ProjectReference Include="..\BLL\BLL.csproj">

  <Project>{FE7F0D24-B28D-4285-8C60-90864D3464CA}</Project>

  <Name>BLL</Name>

  </ProjectReference>

  <ProjectReference Include="..\CRS\CRS.csproj">

  <Project>{A97C9AB2-D3B8-4A88-AF90-A3DD16F899A5}</Project>

  <Name>CRS</Name>

  </ProjectReference>

  <ProjectReference Include="..\ExtLib\ExtLib.csproj">

  <Project>{CCB4B779-C493-4387-B294-D2F47405435F}</Project>

  <Name>ExtLib</Name>

  </ProjectReference>

  <ProjectReference Include="..\Foundation\Foundation.csproj">

  <Project>{6C480FC4-5578-4D05-8034-981F611FF8BD}</Project>

  <Name>Foundation</Name>

  </ProjectReference>

  <ProjectReference Include="..\OracleDAL\OracleDAL.csproj">

  <Project>{A9C63741-1F74-422A-9E33-342DBDA29AF2}</Project>

  <Name>OracleDAL</Name>

  </ProjectReference>

  <ProjectReference Include="..\UserManagement\UserManagement.csproj">

  <Project>{1E0AC510-91FE-46BF-9D4E-D4E9F55DE10B}</Project>

  <Name>UserManagement</Name>

  </ProjectReference>

  </ItemGroup>

  <ItemGroup Condition="'$(Configuration)|$(Platform)' == 'Pelvoux|AnyCPU'">

  <AssemblyAttributes Include="AssemblyFileVersion">

  <Value>3.0.20.2</Value>

  </AssemblyAttributes>

  <AssemblyAttributes Include="AssemblyVersion">

  <Value>3.0.20.2</Value>

  </AssemblyAttributes>

  <WebConfigReplacementFiles Include="Config\PelvouxAppSettings.config">

  <Section>appSettings</Section>

  </WebConfigReplacementFiles>

  <WebConfigReplacementFiles Include="Config\PelvouxConnectionStrings.config">

  <Section>connectionStrings</Section>

  </WebConfigReplacementFiles>

  </ItemGroup>

  <Import Project="$(MSBuildExtensionsPath)\Microsoft\WebDeployment\v8.0\Microsoft.WebDeployment.targets" />

  <!-- To modify your build process, add your task inside one of the targets below and uncomment it.

  Other similar extension points exist, see Microsoft.WebDeployment.targets.

  <Target Name="BeforeBuild">

  </Target>

  <Target Name="BeforeMerge">

  </Target>

  <Target Name="AfterMerge">

  </Target>

  <Target Name="AfterBuild">

  </Target>

  -->

  </Project>

   

   

   

  Thanks for your help

• • Reply
  shura26

  None

  0 Points

  3 Posts

  Re: OutputPath property is not set for this project

  Nov 28, 2007 09:59 AM|shura26|LINK

  Helo, cosmos109!

  Your project file looks very similar to what I did with one exception - I set <OutputPath>.\Debug</OutputPath> for my custom build configuration.

  Try changing output path for Pelvoux configuration to '.\Debug' like this:
  

  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Pelvoux|AnyCPU' ">

  <EnableUpdateable>true</EnableUpdateable>

  <UseMerge>true</UseMerge>

  <SingleAssemblyName>_deploy_UI</SingleAssemblyName>

  <OutputPath>.\Debug</OutputPath>

  <UseWebConfigReplacement>true</UseWebConfigReplacement>

  </PropertyGroup>

  Web deployment project is known to not support configurations other than 'Debug' and 'Release'. 

  This worked for me since I didn't need to have separate output path for my custom configuration.

  _

  shura 

  configuration Web Application Project msbuild

  shura
• • Reply
  cosmos109

  None

  0 Points

  3 Posts

  Re: OutputPath property is not set for this project

  Nov 29, 2007 03:10 AM|cosmos109|LINK

   

  Hello Shura,

   

  Thank you very much for your answer, I didn't know that Web Deployment not suooprt configurations other than 'Debug' and 'Release'.

  But I absolutely need that :)

  I will ask to Microsoft support more information and will update this thread if any good news :)

   

  ++

  Michaël

• • Reply
  lkempe

  Member

  30 Points

  23 Posts

  Re: OutputPath property is not set for this project

  Dec 02, 2007 03:50 AM|lkempe|LINK

  shura26

  Web deployment project is known to not support configurations other than 'Debug' and 'Release'. 

  That is absolutely not true.

  I have a solution that build correctly against Debug, Staging and Release.

  What you have to take car that it is working is to correctly define your configuration with Configuration Manager and set your deployment project to the correct targeted configuration.

  So if you have added a Staging configuration you must define that for the Active solution configuration like on the following post: http://weblogs.asp.net/lkempe/archive/2007/12/02/setting-correctly-your-configuration-for-web-deployment-projects-vs08.aspx

  Best Regards,
  ---
  Laurent Kempé - laurent.kempe@techheadbrothers.com
  Jobping - http://www.jobping.com - Advertises opportunities for Microsoft professionals
  Tech Head Brothers - http://www.TechHeadBrothers.com
  Blog - http://www.laurentkempe.com
  [Microsoft ASP.NET MVP]
• • Reply
  shura26

  None

  0 Points

  3 Posts

  Re: OutputPath property is not set for this project

  Dec 04, 2007 06:50 AM|shura26|LINK

  lkempe

  That is absolutely not true.

  I must admit I was wrong regarding web deployment project confirurations support. I've checked out once again and find out everything working as expected.

  But it is still not clear for me what caused this 'OutputPath property not set' error. Unfortunately I can't reproduce it now, though some time ago it appeared each time I built my solution with any custom configuration.

  Web Deployment Project msbuild

  shura
• • Reply
  lkempe

  Member

  30 Points

  23 Posts

  Re: OutputPath property is not set for this project

  Dec 04, 2007 07:14 AM|lkempe|LINK

  The good point is that it is working for you too now.

  Best Regards,
  ---
  Laurent Kempé - laurent.kempe@techheadbrothers.com
  Jobping - http://www.jobping.com - Advertises opportunities for Microsoft professionals
  Tech Head Brothers - http://www.TechHeadBrothers.com
  Blog - http://www.laurentkempe.com
  [Microsoft ASP.NET MVP]
• • Reply
  Izazuddin Sy...

  None

  0 Points

  1 Post

  Re: OutputPath property is not set for this project

  Aug 12, 2014 04:34 PM|Izazuddin Syed|LINK

  I need help in figuring out this issue.

  In the TFS build definition when I change the Configuration to Release/AnyCPU it is giving the error when I build the Queue.

  Warning Message.

  The OutputPath property is not set for project 'someprojname.csproj'.  Please check to make sure that you have specified a valid combination of Configuration and Platform for this project.  Configuration='Release'  Platform='Any CPU'.  You may be seeing this message because you are trying to build a project without a solution file, and have specified a non-default Configuration or Platform that doesn't exist for this project.

  Error Message

  Exception Message: Could not find a part of the path 'C:\a\bin\_PublishedWebsites'. (type DirectoryNotFoundException)
  Exception Stack Trace: at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
  at System.IO.FileSystemEnumerableIterator`1.CommonInit()
  at System.IO.FileSystemEnumerableIterator`1..ctor(String path, String originalUserPath, String searchPattern, SearchOption searchOption, SearchResultHandler`1 resultHandler, Boolean checkHost)
  at System.IO.Directory.InternalGetFileDirectoryNames(String path, String userPathOriginal, String searchPattern, Boolean includeFiles, Boolean includeDirs, SearchOption searchOption, Boolean checkHost)
  at System.IO.Directory.InternalGetFileSystemEntries(String path, String searchPattern, SearchOption searchOption)
  at Microsoft.TeamFoundation.Deployment.Workflow.Activities.FindPackageAndParametersFile.Execute(CodeActivityContext context)
  at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
  at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)

  It is happening only when I change the Configuration to Release/AnyCPU. If I left the Configurations left empty I am not getting any error message build is success.

  Please help I am going through this situation for more than 4 days now. 

  Thanks,

  Izaz

  configuration Web Application Project msbuild